منزل المنتجاتمحرك هيدروليكي هيدروليكي

Bi - Directional Hydraulic Vane Motor 50M Hydraulic Motor With Replace Cartridge

شهادة
نوعية جيدة دانفوس محرك هيدروليكي للمبيعات
نوعية جيدة دانفوس محرك هيدروليكي للمبيعات
زبون مراجعة
صباح الخير ! قل تحياتي للجميع في المصنع الخاص بك ، والسيارات hydrualic جيدة! لقد كنت في عجلة من أمري ، والزراعة مع العمل ، والحرث! الحقول جاهزة لربيع 2020! انها تساقط الثلوج وبعد الصقيع ، قد Jarmo مرة أخرى في هذا المجال! التحيات ، Jarmo!

—— Jarmol

عزيزي ماجي ، سعيد جدا للتعاون معكم. المحرك الهيدروليكي رائع!

—— سام (مالي)

شكرا ، ماجي. شكرا لك لشركتك!

—— عادل Benhamadi (ليبيا)

مرحبًا يا ماجي ، نحن سعداء بالعمل معك ورضا عن جودة المحرك الهيدروليكي.

—— اليكس (روسيا)

نحن نحب محرك bmer-2 ، ليس فقط بسبب السعر الجيد ، ولكن أيضًا للجودة والخدمة. وتسليم سريع جدا. أحسنت!

—— شارون (الفلبين)

ابن دردش الآن

Bi - Directional Hydraulic Vane Motor 50M Hydraulic Motor With Replace Cartridge

الصين Bi - Directional Hydraulic Vane Motor 50M Hydraulic Motor With Replace Cartridge المزود
Bi - Directional Hydraulic Vane Motor 50M Hydraulic Motor With Replace Cartridge المزود Bi - Directional Hydraulic Vane Motor 50M Hydraulic Motor With Replace Cartridge المزود Bi - Directional Hydraulic Vane Motor 50M Hydraulic Motor With Replace Cartridge المزود

صورة كبيرة :  Bi - Directional Hydraulic Vane Motor 50M Hydraulic Motor With Replace Cartridge

تفاصيل المنتج:

Place of Origin: Jiangsu, China
اسم العلامة التجارية: TPF
إصدار الشهادات: ISO9001 ,CE Certification
Model Number: 50M

شروط الدفع والشحن:

Minimum Order Quantity: 20pcs
الأسعار: negotiation
Packaging Details: Plywood cases
Delivery Time: 25-35 days after order
Payment Terms: 30% pay down ,70% pay before shipping
Supply Ability: 30000pcs/month
Contact Now
مفصلة وصف المنتج
Product Name: rotary vane pump Mode: 50M
Pressure: 2250 psi Displacement: 43.9-317cc
Direction: By-direction Material: Cast Iron
Net Weight: 18-73kgs

25M/35M/45M/50M standard bearing of high profomance vane motor

 

Vickers high performance vane motors, when properly installed in a hydraulic circuit, convert hydraulic power into rotary mechanical power. They are positive-displacement, balanced cartridge units, with drive speed dependent on the motor size and gpm delivery to the inlet port. The units are capable of operating at high speeds and high pressures, or higher speeds at lower pressures, the full range model 50M, 51M, 45M, 46M, 35M, 36M, 25M, 26M Hydraulic Eaton Vickers Vane Motor  

 

 

Specifications:

 

Model Torque
Nm/6,9 bar
(lb in/ 100 psi
Displacement
cm3/r(in3/r)
Flow
L/min(USgpm)
Maximum speed
r/min
Maximum Pressure
bar
Weight (kgs)
50M 24,9 (220) 231,2 (14.11) 277,5 (73.3) 2800 34 73
28,8 (255) 268,1 (16.36) 321,8 (85.0) 3200 34
33,9 (300) 317,1 (19.35) 380,4 (100.5) 2200 155
      2400 172

  

Mounting Data:

Bi - Directional Hydraulic Vane Motor 50M Hydraulic Motor With Replace Cartridge

Bi - Directional Hydraulic Vane Motor 50M Hydraulic Motor With Replace Cartridge

The unit consists principally of a body, cover, drive cartridge and shaft. Rotary motion is developed in the cartridge, which principally consists of a ring, rotor, ten vanes and two pressure plates. The rotor is splined and mates with the output shaft, which is supported by a ball bearing in the body and a bushing bearing in the cover pressure plate.

High Efficiency

Optimum running clearances and hydraulic balance assure sustained high efficiency over the life of the motor.

Mounting Flexibility

The motor’s cover can be assembled in four positions with respect to the body. Changing port positions is accomplished by simply rotating the cover, and the cartridge which is pinned to the cover, in 90_ increments, thus providing the optimum mounting for connecting piping.

Easy to Service

The drive cartridge is accessible by removing the motor’s cover and can normally be replaced in ten minutes without removing the motor from the machine. The torque capability of motors within the same model series can be changed by changing the

cartridge or cam ring.

Low-wear Design

25M - 50M motors are hydraulically balanced to reduce wear and heat-producing friction. All internal inlet chambers are equally and diametrically opposed. As a result, pressure induced radial loads are balanced. Shaft bearings only have to carry external

loads so wear is greatly reduced.

Proven Reliability

For more than two decades, the reliability of these high performance motors has been field proven on a variety of machinery applications.

تفاصيل الاتصال
DANYANG TITAN POWER FLUID COMPONENT CO.,LTD

اتصل شخص: Ms. zhu

إرسال استفسارك مباشرة لنا (0 / 3000)